Here is a look at some of the new innovations in bridge saws currently on the market.
AGM's new CNC saw, the Optimaster, is fully automated and uses a CAD-CAM system to write and store programs. According to the manufacturer, this saw represents a true breakthrough for the industry since it allows fabricators to design and operate a truly automated shop. The CNC saw also increases productivity because of its highly automated nature; it is programmed similarly to a CNC router and uses a CAD-CAM system to locate and optimize cuts on slabs. The unique advantage of AGM's CNC saw is the seamless connection between its CNC saw, routers and waterjet as each machine uses the same CAD-CAM system. This simplifies operator training and streamlines production since only one CAD-CAM system is needed, reports AGM. The Optimaster also uses a camera system, which helps operators to optimize cuts and material, saving time and money. For special cuts and small quantities, the saw can also be operated in manual mode.
AGM also offers a turnkey solution that includes the Template Master templating system, the Intermac Master 33/43 CNC router and the AGM Masterjet 3600 waterjet. By combining the templating system and the Optimaster, fabricators will be able to reduce templating errors, reduce production times and increase overall production efficiency, the company reports.
Circle No. 289
The Achilli MBS 3000 CE offered by Braxton-Bragg Corp. handles full-sized slabs with a useful cut of 10 feet, 2 inches. It comes standard with a control panel and pendant control with a 20-foot cord. An optional water-recycling tank with pump is available. Weighing in at 3,916 pounds, the MBS offers a table size of 12 feet, 8 inches x 7 feet, 3 inches that consists of a replaceable marine plywood bed with electrically driven hydraulic pop-up rollers to facilitate slab positioning. Because the MBS does not need a turntable, tremendous space is saved in the shop, allowing for better use of floor space. The special engineered design of the saw has proven to be extremely strong and sturdy, guaranteeing straight X and Y cuts. Additionally, the design took safety into consideration, as visibility is 70% greater than that of saws placed on block wall foundations. The wood base is very durable, allowing for hundreds of slabs to be cut before exchanging. In most cases, the wood boards can be turned over for double life. Once the life of the boards are spent, they can be exchanged in 1â„10 of the time that it would take to redress or re-pour a standard concrete-based bed or turntable, according to the manufacturer.
Technical Specifications
• Horsepower: 10 hp
• Level of automation: laser guide, head tilt/ rotation, digital readout
• Machine size: 14 feet, 3 inches wide x 7 feet, 5 inches long x 7 feet, 2 inches high
• Control description: digital readout displays for ammeter, head and bridge travel (x, y axes) blades depth control (z-axis), pendant control set-up
• Turntable description: hydraulic pop-up rollers
• Degree of head tilt: up to 45 degrees, saw head with positive lock at 90, 180 and 270 degrees; manual operation
• Blade size: up to 16 inches
• Specific benefits for fabricator: combines bridge and gantry movements, making it a very versatile saw
Circle No. 288
Braxton Bragg Corp. also distributes the Achilli ABS 3500 CE, featuring a large table size of 15 feet, 4 inches x 7 feet, 4 inches, which allows for a cut of 12 feet long x 6 feet wide x 10 inches high.
Weighing 5,600 pounds, the ABS features a replaceable marine plywood bed with 54 electrically driven hydraulic pop-up rollers to facilitate slab positioning. Because the ABS does not need a turntable, tremendous space is saved in the shop, allowing for better use of floor space. It also features the strength, safety and base of the MBS.
The most valuable time saving advantage of the ABS is its CNC programming. The ABS can be pro-grammed to store hundreds of cut sequences on both the X and Y axis.
Technical Specifications
• Horsepower: 15 hp
• Level of automation: cut programming by means of a CNC axis control unit
• Machine size: 17 feet, 9 inches long x 9 feet, 2 inches wide x 7 feet, 6 inches high
• Control description: CNC controlled
• Turntable description: hydraulic rollers
• Degree of head tilt: 45 degrees
• Blade size: 12 to 20 inches
• Specific benefits for fabricator: offers gantry and bridge saw movements with no support walls to build and can be installed in about a day
Circle No. 287
Simple, precise and sturdy, the Easycut FE 600 bridge saw from Breton is ideal for the most frequent processing, reports the company. The saw is equipped with a 24.6-inch circular blade, manually inclinable in any position from 0 to 90 degrees with the possibility of step-cutting, even inclined. Additionally, it features user interface with keyboard on a mobile arm and lined display for control, command and programming. A larger model, Easycut FE 800, is also available from Breton.
Technical Specifications
• Horsepower: 29 hp
• Machine size: 220.5 x 216.5 x 110 inches
• Degree of head tilt: 0 to 90 degrees
• Blade size: 24.6 inches
Circle No. 286
The Speedycut FK/NC 800, also from Breton, is a precise and sturdy bridge saw, ideal for any type of processing, even the most sophisticated, according to the manufacturer. With the use of brushless motors, the saw guarantees high working speed. It features a 31.5-inch circular blade, manually inclinable in any position from 0 to 90 degrees, with possibility of step-cutting, even inclined. It offers great possibilities of customization.
Operated by Siemens Sinumerik 810D Numerical Control, it works with axis interpolation through the CAD/CAM software installed on the machine.
Additionally, it offers user interface with a Personal Computer that has a 15-inch color “touch screen.†It can be equipped with one or two workbenches.
Larger models, Speedycut Fk/NC 1100 and Speedycut FK/NC 1400, are also available from Breton.
Technical Specifications
• Horsepower: 29 hp
• Machine size: 271.6 x 228.3 x 126 inches
• Degree of head tilt: 0 to 90 degrees
• Blade size: 31.5 inches
Circle No. 285
CMS/Brembana offers the Flexa 625, an automatic bridge saw for cutting marble, granite and other natural and manufactured stones. The machine is a traditionally designed mobile bridge structure made from high-gauged rigged steel, undergoing a rust proofing
and sandblasting treatment, therefore guaranteeing against corrosion. Prim-arily designed for countertop fabrication. Cutting as single or multi-cut step cutting operations, the Flexa 625 is capable of increment cuts in X and Y directions - all easily achieved through the user-friendly push-button control panel conveniently positioned from a suspended articulated swinging arm.
Technical Specifications
• Horsepower: 30 hp
• Level of automation: semi-automatic
• Machine size: 3,600 x 3,600 mm
• Control description: CMS/PLC
• Turntable description: manual
• Degree of head tilt: 0 to 90 degrees
• Blade size: 32.5 inches maximum
• Specific benefits for fabricators: designed for slab and solid piece cutting; suitably sized machining center for all workshops
Circle No. 284
Also available from CMS/Brembana is the Antea 150, a fully automatic bridge saw. This saw also was built with a traditionally designed mobile bridge structure made from high-gauged rigged steel, undergoing a rust proofing and sandblasting treatment, therefore guaranteeing against rust. It was designed for quick production of multiple piece countertops from a single workpiece in record times. Equipped with user-friendly OSAI control, all operations are fully automatic without any user intervention. Programming is made via EasyStone CAD/CAM software, which is installed directly onboard the control. Automatic compensation is calculated by diameter of the blade, drastically reducing the amount of material wastage.
A motorized rotating table (C-axis) is available in two sizes: 3,300 mm x 1,600 mm (129.92 x 62.99 inches) and 3,500 mm x 1,800 mm (137.79 x 70.86 inches), which can be locked at any given angle from 0 to 360 degrees, also available as a tilting table for easy loading of workpieces. Additionally, the saw features an adjustable blade feed of 0 to 20,000 mm (0 to 787 inches) per minute. An 18-hp electrospindle mounted on the right-hand side is available for automatic drilling of L-shaped corners and limited milling work. Axis dimensions are X axis: 3,600 mm (141.73 inches), Y axis: 3,600 mm (141.73 inches) and Z axis: 400 mm (15.74 inches), allowing maximum cutting depth of 250 mm (9.84 inches). A laser line indicator for accurate alignment of workpieces comes standard.
Technical Specifications
• Horsepower: 29.5 hp
• Level of automation: automatic
• Machine size: 3800 x 3800 mm
• Control description: OSAI
• Turntable description: automatic
• Degree of head tilt: 0 to 90 degrees
• Blade size: 32.5 inches maximum
• Specific benefits for fabricators: ideal for the architectural industry with capability to perform profile work creating profiles on large block materials; suitable for medium-sized workshops
Circle No. 283
The Petra bridge saw from CMS/Brembana is designed especially for the masonry and building sectors, and is capable of cutting standard and large blocks up to 31.5 inches (800 mm). The manual rotating table, measuring 137.79 x 70.86 inches (3,500 x 1,800 mm), can be locked in any position from 0 to 360 degrees.
Cutting can be programmed as single or multi-cut step cutting operations.
Blades up to 78.74 inches (2000 mm) are mounted to the standard 55kW / 74 hp motor, which can be upgraded to 75kW / 100 hp. There is an optional inverter, and the blade locking flange diameter is 14.56 inches (370 mm). Additionally, the cutting stroke of the blade is X = 4,000 mm and Y = 4,000 mm (157.48 x 157.48 inches). A laser line indicator for accurate alignment of workpieces on the worktable is a standard feature.
Technical Specifications
• Horsepower: 74 hp
• Level of automation: automatic
• Machine size: X = 3,500 mm, Y = on request
• Control description: OSAI
• Turntable description: automatic
• Blade size: 78.74 inches
• Specific benefits for fabricators: cutting standard and large blocks up to 31.5 inches
Circle No. 282
Edgemarc is now offering the Swarm 2500HT bridge saw, which was developed for the professional fabricator. The combination of the touch-screen, spinning table, hydraulic tilt and the spinning head make the machine easy and efficient, according to the manufacturer. Precise automation of cut dimensions saves the operator time and money. Utilizing the combination of spinning table, laser guide and the hand-held remote operator makes set up effortless. The easy-to-use touch-screen allows for full motion control of X, Y and Z axis. Use the touch-screen to program multiple cuts of the same size or various sizes in seconds.
Technical Specifications
• Horsepower: 10 hp
• Machine size: 72 x 120 inches
• Blade size: 12 to 16 inches
• Table lock: 0 to 360 degrees
Circle No. 281
Löffler saws from EuroStone Machine require one operator and can be combined with user-friendly software for integration of the saw, edgers and CNC, reports the manufacturer. Löffler systems are modular, flexible and adaptive. The Continuous Processing System is newly equipped with a drilling spindle for pilot holes, faucet holes and “L†returns to save time on your CNC. Vacuum pads reposition parts for cross-cutting to increase slab yield. The Automatic Rodding Saw creates a groove for reinforcing rod.
Templates from Löffler Galileo Windows®-based software are down-loaded to the CPS. Then, the operator loads a slab onto the tilting table, marks defects, then makes a digital image. The operator then nests countertop elements from .dxf or Galileo. Seams are checked and matched. The slab moves to the saw - sawing, drilling and rodding follow automatically, unattended. The pieces move to the unloading table for bar-coding. Average cycle time is 15 to 20 minutes.
Technical Specifications
• Horsepower: 20 hp or other
• Blade size: 14 to 24 inches
• Degree of head tilt: 45 or 90 degrees
• Control description: Siemens Industrial PC-based control
• Turntable description: auto-rollers, 135-inch maximim cut
Circle No. 281
Granite City Tool now offers the Patriot J126-18 bridge saw. Standard features include touch-screen control, a hand-held control pendant, a laser alignment guide, auto-cut sequencing and travel speed read-out. This cross travel drive is rack and pinion with variable speed, powered by an AC motor with VFD control. Cross travel movement is on precision linear ball bearings and hardened, ground steel rails. Retractable bellows/way covers protect linear bearings, and flange mount bellows offer vertical screw actuator protection.
The machine also features an auto solenoid for water activation when blade starts, a digital ammeter for the main motor, a manual water shut-off valve, and an aluminum blade safety guard. The saw head functions controlled from main control panel, and the unit features safety switches for saw head protection.
The hydraulic-controlled tilt table offers up to a 75-degree tilt, and it is controlled from a hand-held pendant.
Technical Specifications
• Premium efficiency arbor drive motor: 10 hp
• Cutting length: 10 feet, 6 inches
• Lateral travel: 10 feet, 6 inches
• Blade diameter, maximum: 18 inches
• Locking flange diameter: 6 inches
• Vertical travel: 16 inches
• Height from floor to table surface: 32 inches
• Overall height: 9 feet, 10 inches (app.)
• Rail height from floor: 50 inches
• Overall width: 17 feet, 6 inches
• Overall length: 16 feet
Circle No. 280
GranQuartz offers a complete selection of Emmedue bridge saws for the stone fabricator. Well-known for their ruggedness, dependability, performance and affordability, Emmedue bridge saws are an excellent choice for any fabricator, reports the manufacturer.
Emmedue's complete lineup includes the Astra, Eclipse, Moon and three Euromec portable bridge saws. The Astra is Emmedue's top-of-the-line, three-axis machine, featuring heavy-duty steel construction, motorized bridge movement, a rotating worktable and a hydraulic tilting table. The unit measures 18.4 x 7.4 x 6.6 feet, offers travel of 9.9 feet (X) x 5.3 feet (Y) x 10.6 inches (Z), with a cutting capacity of 11.8 x 6.2 feet.
GranQuartz has a long-standing record of service after the sale, utilizing three full-time certified technicians to assist shop owners and operators in optimizing saw performance, according to the company.
Technical Specifications
• Horsepower: 10 hp
• Level of automation: semi-automatic
• Machine size: 18.4 x 7.4 x 6.6 feet
• Control description: remote swing-arm panel
• Turntable description: manual rotating worktable with pneumatic stops at 0, 90 and 180 degrees
• Degree of head tilt: 0 to 90 degrees
• Blade size: 16 inches (granite), 20 inches (marble)
• Specific benefits for fabricators: rugged, dependable; no foundation required
Circle No. 279
IGE Solutions Elite automatic bridge saw offers the best value on the market today, according to the manufacturer. This saw builds on IGE Solutions goal of embracing the latest software and equipment technologies to maximize productivity and profits, while reducing labor, handling and waste. This saw features a heavy-duty construction for extra-long machine life, and is built to ISO 9001 standards. It also has a corrosion-resistant, powder-coated finish, and proven, reliable standard electronic components. The saw weighs 11,000 pounds, with a 6,000-pound bridge. The bridge is fully automatic with arbor and miter adjustment. The IGE Elite also features a fully automatic 360-degree rotating table with eight locking positions, and smooth hydraulic movement and braking. The head is adjustable, and tilts from 0 to 45 degrees. The speed of the saw is adjustable, and it uses laser-assisted cutting for improved accuracy.
Technical Specifications
• Horsepower: 20 hp
• Level of automation: advanced automation
• Machine size: 236 x 236 x 130 inches
• Control description: CNC
• Turntable description: automatic 360-degree rotating table with eight locking positions and hydraulic movement and brake; 126- x 79-inch working table
• Degree of head tilt: 0 to 45 degrees (adjustable)
• Blade size: 14- to 20-inch diameter
• Production rate: cutting speed = 0 to 10 m / min
• Specific benefits for fabricators: offers exceptional value for a high-quality, feature-rich saw
Circle No. 278
IGE Solutions also carries multiple bridge saws from Pedrini of Italy, with various capabilities for different applications and fabrication shops. The base models are the M920 and M940, but each of these comes with many options. All the Pedrini saws are highly advanced, precision machinery with heavy-duty cast iron construction. They are designed for maximum flexibility, as well as reliability and long life. Some models are equipped with CNC control, and are easily programmed by color touch-screen monitors. Some machines use an electro-spindle, which is appropriate for machining with shaping tools, and some models serve as a lathe to manufacture columns. Step cutting is possible in 0- to 90-degree tilting positions. Also, these machines are designed with a high resistance to cross stresses, so they are excellent for spatula cutting applications, reports the manufacturer.
Technical Specifications
• Horsepower: 24 to 38 hp (exact hp depends on model)
• Level of automation: advanced automation
• Machine size: 234 x 339 x 191 inches or 218 x 109 x 129 inches (exact dimensions depend on model)
• Control description: CNC available
• Degree of head tilt: 0 to 90 degrees
• Blade size: 15- to 35-inch diameter (exact dimensions depend on model)
• Production rate: 0 to 16 minutes/minute
• Specific benefits for fabricators: flexibility, speed, reliability and a heavy-duty machine with some unique processing capabilities
Circle No. 277
The internationally patented Prussiani Champion 5, available through IGE Solutions, is a 5-axis CNC saw specifically designed for high-production kitchen counter fabricators to make them more profitable and efficient. This saw minimizes downtime to allow the operator to program the saw and/or move pieces around in order to cut complex shapes. Suction lifters pick up and move cut pieces for maximum efficiency. The Champion 5 can automatically cut all types of shapes, including radius cuts, inside 90-degree angles and more. In addition, it also automatically cuts the reinforcement rod channels with a second blade. The Champion 5 uses a true Windows “open architecture†environment that handles .dxf files, allowing the saw to cut while programming. The saw only stops cutting to load and unload stone. The operator requires no previous software programming experience. The Champion 5 saves valuable production space, as well as time, as it routinely handles the production of three to five conventional bridge saws, IGE reports.
Technical Specifications
• Horsepower: 25 hp for main blade, 20 hp for second, underside rodding blade
• Level of automation: advanced automation, that includes the use of .dxf files, movement of pieces to avoid over cutting, a second blade for automatically cutting the rodding reinforcement channels, etc.
• Machine size: 3.8 x 2.5 meters with cutting strokes 150 x 98.5 inches
• Control description: advanced CNC, Full Industrial PC 5-axis Fagor 8070
• Turntable description: saw head moves a full 360 degrees, so table does not need to turn, providing greater accuracy and control; bed holds over 11,000 pounds
• Degree of head tilt: head tilts and interpolates 90 degrees and has 18-inch vertical z-axis movement interpolated
• Blade size: 26-inch maximum
• Production rate: automatically cuts a complete slab from .dxf files every 12 to 15 minutes without an operator present
• Specific benefits for fabricators: maximum productivity and capacity, increased reliability, and long machine life
Circle No. 276
The IMC TURBO/525 bridge saw is the newest addition to International Machine Corp.'s bridge saw product line. The TURBO/525 has been designed and crafted specifically and exclusively for IMC, combining European technology and experience with IMC's expert specifications. Standard features and benefits include: a blade miter: 0 to 90 degrees; manual; a laser sighting system; a movable remote control panel arm; an automatic program system; a tilting turntable (hydraulic); two-speed motor for marble and granite; and an electro water valve. Six steel columns for rail support can be added to the installation package. Installation, parts and servicing are provided by International Machine Corp.'s highly trained technicians.
Technical Specifications
• Main motor size: 20 hp
• Main motor: direct drive
• Main motor power: 220V 60HZ
• Blade capacity: 525 mm (20 inches)
• Maximum sawing depth: 80 mm (5.2 inches)
• Rise & fall: 400 mm (6 inches) (motor driven)
• Saw travels on a precise “V†guide
• Cutting length and width: 149.5 x 149.5 inches
• Powered gantry (variable speed)
• Powered cross travel (variable speed)
Circle No. 275
International Machine Corp. has over 200 satisfied Zonato FPZ 500 bridge saw customers throughout the U.S., many with more than one machine. Standard features and benefits include: a blade miter: 0 to 90 degrees; manual; a laser sighting system; a movable remote control panel arm; an automatic program system; a tilting turntable (hydraulic); two-speed motor for marble and granite; an electro water valve; and an automatic step cutting system for cutting granite.
Technical Specifications
• Main motor size: 20 hp
• Main motor: direct drive
• Main motor power: 220V 60HZ
• Blade capacity: 525 mm (20 inches)
• Maximum sawing depth: 80 mm (5.2 inches)
• Rise and fall: 400 mm (6 inches) (motor driven)
• Saw travels on a precise “V†guide
• Cutting length and width: 149.5 x 149.5 inches
• Powered gantry (variable speed)
• Powered cross travel (variable speed)
Circle No. 274
The IMC Cobalm D15 bridge saw from International Machine Corp. is built with an electric-welded steel structure with robust frame bars to support particularly heavy weight. Metal shoulders replace conventional concrete walls, facilitating installation and any transport of the machine. Axis movement is powered by DC motors with NC control, giving simultaneous movement on all axis. The D15 has a rotating bench with display, locking on 360 degrees. The grinding head rotates 0 to 90 degrees in manual or automatic mode. The control panel can be manual, semi-automatic and automatic. The maximum dimensions are 400 x 2500 mm. The D15 has a numerical control contouring machine option. Evolution of the standard machine; handling with dc motor and epicyclic gear reducers. The interpolation is contemporaneous on the three X, Y and Z axis. Powerful electric drilling is controlled by an inverter. A powerful cad/cam makes possible geometric, parametric, artistical or scanner programming.
Technical Specifications
• Main motor size: 18 hp
• Main motor: direct drive
• Main motor power: 220V 60HZ
• Blade capacity: 625 mm (24 inches)
• Rise and Fall: 7 inches (motor driven)
• Cutting length and width: 118 inches
• Powered gantry (variable speed)
• Powered cross travel (variable speed)
• Overall dimensions: 222 x 161 x 118 inches
Circle No. 273
International Machine Corp.'s Levi Tunisi LT FP 546 bridge saw is manufactured in Canegrate, Italy, north of Milan. This area is known throughout the world for its long tradition in the engineering industry. The LT FP 546 bridge saw offers “quality and reliability,†which is the Levi Tunisi motto. IMC adds the technical expertise required for a seamless installation and all servicing requirements, according to the company. The LT FP 546 has an inclined step cut up to 45 degrees and an inclinable head up to 90 degrees; a turnable table that moves 0 to 45 degrees and 90-degree precision blockage; head speed for forward and backward movement controlled by an inverter that is independently adjustable and a water opening control on the main board.
Technical Specifications
• X axis cutting stroke: 140 inches
• Bridge movement: 136 inches
• Vertical stroke: 14 inches
• Maximum disc diameter: 20 inches
• Disc hole diameter: 2 inches
• Disc motor power: 20 hp
• Head gear motor power: 1 hp
• Bridge gear motor power: .05 hp
• Slide for step cut gear motor power: .075 hp
• Total power: 23 hp
• Table dimensions: 132 x 72 inches
• Machine dimensions: 212 x 168 x 98 inches
• Total weight: 8,818 pounds
Circle No. 272
The Combi 3000 from Imer USA cuts a full 10 feet, sets up in two to three hours and is extremely easy to use, according to the manufacturer. The Combi 3000 comes with everything needed, including a laser guide, handling tables, water collection system, silent core blade, slab clamps, over-sized fence guides, self-diagnosing computer controls and full set-up and maintenance instructions. The Combi 3000 is perfect for the start-up shop, a full-size shop needing on-site fabrication or a versatile complement to their existing shop saw, reports the manufacturer.
Technical Specifications
• Horsepower: 4 hp 220V 20 amp, single phase
• Level of automation: fully automated cutting head
• Working size: 10-foot length of cut
• Control description: computerized automation/diagnostic functions
• Turntable description: roller tables (two included with machine)
• Degree of head tilt: 45/90 hydraulic action
• Blade size: 14 inches
• Production rate: standard slabs - 10 feet in 4 minutes
• Specific benefits for fabricators - easy to set up, easy to move
Circle No. 271
The B-300 bridge saw from Johnson Marble Machinery is designed as a premier high-volume workhorse. The B-300, with fingertip controls, provides maximum productivity, ease of use, maximum cutting accuracy and minimum material handling - all features that add to the bottom line profitability of each job. Refined and improved over the years, the B-300 offers all of the bells and whistles without sacrificing reliability.
Features of the B-300 include a heavy-duty steel 1 1â„4-inch-thick beam to provide rigorous support and ensures accurate heavy material cutting. A power gantry and carriage feed allows integrated rack and gear drives to extend for 12 feet of horizontal cutting and 13 feet of lateral movement of the gantry with an electric brake. A motor-driven lead screw that moves assembly a full 20 inches vertically accomplishes carriage elevation. An arbor motor with locking pin allows motor to be tilted at any angle up to 90 degrees with positive stops at 45 and 90 degrees.
The control panel with joystick and emergency stop button allows variable speeds on elevation as well as cross feed and gantry movement, and digital read out and laser alignment allows for more accurate cuts and easy adjustment.
The saw also features a pneumatic locking turntable with positive stops at 0, 45 and 90 degrees (additional 45-degree increments optional).
Circle No. 270
Marmo Machinery USA's HTO-1B is a fully automatic bridge saw that is ideal for quickly and accurately cutting granite and marble slabs. The HTO-1B is an extremely heavy-duty, well-built machine designed for the toughest cutting jobs. It is made with a double-beam bridge and oversized steel construction. Bridge movement is on cylindrical rollers contained in oiled guides. Rack and pinion gearing with helicoidal teeth ensure smooth movements. The bridge saw is programmable, which allows the operator to program its movement in manual, semi-automatic and automatic cutting mode. It can program up to 792 different cuts for maximum flexibility. The controls are easily understood and simple to operate, according to Marmo Machinery.
A 20-hp motor provides cutting speeds of approximately 120 lineal feet of 3-cm-thick (1.18 inches) material per hour. The motor is connected directly to the cutting blade without the use of V belts, which allows the HTO-1B's motor to obtain the characteristics of a 25-hp belt-driven motor. The unit's cutting blade head can tilt from 0 to 90 degrees.
Each HTO-1B is equipped with an hydraulic tilting table that is effective in loading slabs on the cutting surface, greatly reducing manpower require-ments and potential injuries to shop personnel.
The unit is equipped with a rotating table lockable at any angle position. The table is easily rotated. The angle shot indicator displays the angle at which the table is being rotated through. Additionally, the bridge saw is built for U.S. power standards of 230 v. 60 Hz.
Circle No. 269
The Sebring from Matrix Stone Products is constructed using the highest grade of components such as a powerful 20-hp direct-drive Italian sawing motor, reports the manufacturer. It is a precision ground bridge saw with a German-made laser, an amperage meter for maximum cutting efficiency and direct-drive DC-electric motors with fingertip speed control for all drive motions. The heavy-duty rotary saw table features four positive position stop locks for accurate angle cutting. An “any angle†position lock allows for easy angle set up. Additionally, a remote control pendant, digital read-out, and electric water control valve makes operation convenient for the operator.
Technical Specifications
• Rotary saw table: 10- x 6-foot, 360-degree rotation
• Bridge saw long travel: 138 inches
• Vertical travel: 10-inch stroke length
• Saw motor: 20-hp arbor shaft style, Italian-made motor
• Bridge saw feed: 1â„2-hp motor with variable speed control, 1 1â„2-inch osborne load roller bearings, laser alignment system, 3â„4-inch drive rack and pinion, electric over travel protection
• Vertical travel feed: 3â„4 -hp motor with variable speed control, adjustable travel limit switch control
• Head tilt: 0 to 45 degrees
• Blade size capacity: 14 to 26 inches in diameter
Circle No. 268
Park Industries' Yukon brings programmable precision computer control and automated cycles to dimensional sawing. The easy-to-use, touch-screen computer control guides operators through a wide variety of production steps. The Yukon may be operated in fully manual, semi-automatic and fully automatic modes. The Yukon delivers durable, versatile cutting capabilities all the time with its rigid, high-tolerance construction and size of 16 feet, 6 inches long x 18 feet, 4 wide x 9 feet high. The powerful 20-hp arbor-drive electric motor powers diamond blades up to 24 inches in diameter. In addition, the new 1-hp motor runs up to 3,600 rpm's and has doubled the rapid traverse rate, now at 1 to 50 feet per minute. The Yukon's ample cross travel and rack and pinion drive system aids operators in processing full slabs of material with greater accuracy. A laser saw blade alignment indicator also improves set-up for long passes.
Circle No. 267
Park Industries' Sierra bridge saw is designed to provide stone countertop fabricators with an affordable, precision saw with the capability of handling a wide variety of materials.
The Sierra can process full slabs up to 7 cm (2 3â„4 inches) thick over its generous 12 feet of gantry travel. The Sierra is sized at 15 feet, 10 inches long x 16 feet wide x 6 feet, 6 inches high, and it features heavy-duty construction and proven industrial-duty components to assure extended saw life and superior cutting accuracy.
The Sierra uses either a 14-inch diameter blade for granite sawing or a 16-inch diameter blade for sawing marble. A powerful 10-hp electric main motor (15-hp option available) directly drives the saw arbor for more efficient energy transfer to the blade. Variable speed cutting motion abilities, combined with the rack and pinion drive, provides cleaner cuts and extended diamond life in the blade. The 6-inch powered variable speed rise and fall of the blade allows for precise cutting and accurate vertical blade positioning. The entire bridge may be indexed from 0 to 47 degrees with hard stops for mitering, without the need for repositioning or jig fixtures.
Circle No. 266
Regent Stone Products proudly introduces the Express 3200 bridge saw to its existing line of premium equipment. Designed specifically for the stone countertop fabricator, the Express comes standard with the features that others sell as extras. These features include: a heavy-duty cast iron bridge; a cast iron, fully synchronized and oil-filled rack and pinion gantry system that is sealed from the elements; and a direct-drive, 20-hp motor with hand-held remote control. The Z-axis tilts to plunge cut to 45 degrees, with a motorized hydraulic tilting table that automatically turns to 45 and 90 degrees with digital readout of position. Rounding out the list of standard features is an automated cutting program. The Express 3200 is professionally installed and serviced by the factory-trained technicians at Regent Stone Products.
Technical Specifications
• Horsepower: 20-hp, direct-drive saw motor
• Level of automation: programmable cutting computer
• Machine size: 20 x 16 x 81â„2 feet
• Control description: PLC controlled
• Turntable description: automatic tilting and rotation with digital readout
• Degree of head tilt: 0 to 45 degrees whole unit, which allows for plunge cutting
• Blade size: 16 to 24 inches
• Production rate: 10 feet in 50 seconds
• Specific benefits for fabricators: solid cast iron bridge and Z movement providing precision, corrosion resistance and is sound reducing; the most saw, features and performance anywhere for the money
Circle No. 265
The Storm and Storm+ are the newest additions to Regent Stone Product's line of bridge saws. The Storm has many of the features found on more expensive bridge saws, while being priced to be competitive with other entry-level saws, Regent reports. The Storm can be mounted on two support post structures or can be installed on block walls. Some of the standard features of the Storm include: double bridge beam design; all saw head and bridge movements are motorized; a 20-hp, direct-drive saw motor with laser; a 45-degree manual tilting saw head; and a rotating and locking turntable with an easy lift slab tilting device for loading and unloading slabs that can be quickly locked at 0, 45 and 90 degrees and manually locked at any other desirable degree. All of these features make this saw a tremendous value for the price. The Storm+ has all the features of the Storm, and is also equipped with a tilting bed and a fully automatic computer to allow programmable cuts.
Technical Specifications: Storm
• Horsepower: 20-hp, direct-drive saw motor
• Level of automation: motorized X, Y and Z movement with precision manual controls
• Machine size: 20 x 15 x 9 feet; 8,000 pounds
• Control description: PLC controlled
• Turntable description: slab assist tilting system, manual rotation with stops at 90 and any degree
• Degree of head tilt: 0 to 45 degrees whole unit which allows for plunge cutting
• Blade size: 14 to 20 inches
• Production rate: 10 feet in 50 seconds
• Specific benefits for fabricators: the heavy-duty Storm is the perfect balance between price and performance for the value-minded customer
Technical Specifications: Storm+
• Horsepower: 20-hp, direct-drive saw motor
• Level of automation: programmable cutting computer with large touch-screen computer
• Machine size: 20 x 15 x 9 feet, 9,000 pounds
• Control description: PLC controlled
• Turntable description: automatic tilting hydraulic system, manual rotation stops at 90 degrees and any degree with digital readout
• Degree of head tilt: 0 to 45 whole unit which allows for plunge cutting
• Blade size: 14 to 20 inches
• Production rate: 10 feet in 50 seconds
• Specific benefits for fabricators: Storm + is loaded with all of the features that rapid fire production-oriented shop demand
Circle No. 264
The America 3600 bridge saw is the most popular saw in Regent Stone Products' vast inventory, and is manufactured for durability and long-service life. This bridge saw is equipped with many standard features, and it has one of the most robust hydraulic tilting tables available to insure a quality cut. Features include a 20-hp direct-drive motor, motorized vertical blade and gantry movement, a laser, tilting head, programmable computer and remote control. The twin beam design assures a fast and clean cut, according to the manufacturer. This saw is able to cut a 12- x 12-foot slab, with the ability to cut up to 8-inch-thick material. It will operate a blade from 14 to 24 inches, and the saw weighs 6,600 pounds.
Technical Specifications:
• Horsepower: 20-hp, direct-drive saw motor
• Level of automation: programmable cutting computer
• Machine size: 17.5 x 15.8 x 7.6 feet
• Control description: PLC controlled
• Turntable description: automatic tilting, manual rotation with digital readout for degree
• Degree of head tilt: 0 to 45 degrees
• Blade size: 14 to 24 inches
• Production rate: 10 feet in 50 seconds
• Specific benefits for fabricators: designed specifically for the fabrication of stone countertops, the America has been the fabricators choice for nearly 10 years when production and accuracy are required
Circle No. 263
The Dynamica from Regent Stone Products uses the most advanced construction and engineering com-ponents to make an extremely accurate and durable saw. The high-quality linear slide with roller and ball bearing system is equipped on all axes (X,Y,Z). This new system guarantees precision vibration-free cuts, increased life of blades and reduced maintenance. The design of this saw allows it to have a smaller footprint, reducing the space required in your shop while allowing it to cut full-sized slabs. The design of rotating enlarged bed and rotating head cutting in multiple directions makes all of these features possible.
Technical Specifications
• Horsepower: 20-hp, direct-drive saw motor
• Level of automation: programmable cutting computer
• Machine size: 17.5 x 10 x 7 1â„2 feet
• Control description: PLC controlled
• Turntable description: automatic tilting, manual rotation with digital readout for degree
• Degree of head tilt: 0 to 45 degrees
• Blade size: 14 to 20 inches
• Production rate: 10 feet in 50 seconds
• Specific benefits for fabricators: the one piece mono-block design and automatic turning saw head (0 and Y axis) equals the production of larger saws, while using only 60% of the floor space; at 9,200 pounds, this overbuilt workhorse is the fabricators choice when performance and accuracy are required with less shop space
Circle No. 262
The GMM Tecna from Salem Stone/GMM is a bridge sawing machine equally compatible with small workshops as well as large plants. It is easy to use and efficient. This versatile sawing machine is uniquely suited for small jobs as well as handling the most demanding production output. All operations can be executed manually or automatically by the easy-to-use multi-cut program, which is capable of processing parallel cuts with fixed dimensions repeatable up to 99 times. The Tecna features GMM's signature accuracy: 0.004 of an inch over a 12-foot cut.
Technical Specifications
• Blade cutting stroke: 3,600 mm
• Blade vertical travel: 400 mm
• Maximum bridge movement: 3,500 mm
• Blade diameter (maximum): 725 mm
• Maximum cutting depth (largest blade): 255 mm
• Blade arbor hole diameter: 50 mm
• Table dimension (eight side shelves): 1,500 x 3,000 mm
• Blade motor power: 30/22 hp/kW
• Spindle speed (50/60 Hz): 1,465/1,725 rpm
• Adjustable speed of blade carriage: 0÷18 m/min
• Machine weight: 3,900 kg
• Overall dimension: 6.68 x 5.90 x 2.95 m
Circle No. 261
The Lexta from Salem Stone/GMM is the medium-sized bridge sawing machine equally compatible with small workshops as well as large plants. It is easy to use and efficient. This versatile sawing machine is uniquely suited for small jobs as well as handling the most demanding production output. All operations can be executed manually or automatically by the easy-to-use multi-cut program, which is capable of processing parallel cuts with fixed dimensions repeatable up to 99 times. The Lexta features GMM's signature accuracy: .004 of an inch over a 12-foot cut.
Technical Specifications
• Blade cutting stroke: 3,600 mm
• Blade vertical travel: 420 mm
• Maximum bridge movement: 500 mm
• Blade diameter (maximum): 825 mm
• Maximum cutting depth (largest blade): 305 mm
• Blade arbor hole diameter: 50 mm
• Table dimension (eight side shelves): 1,600 x 3,300 mm
• Blade motor power: 30/22 Hp/kW
• Variable spindle speed: 700÷2,000 rpm
• Adjustable speed of blade carriage: 0÷18 m/min.
• Machine weight: 4,700 kg
• Overall dimension: 7.00 x 5.90 x 3.00 m
Circle No. 260
Salem Stone/GMM's Axia is the medium-sized bridge sawing machine equally compatible with small workshops as well as large plants. It is easy to use and efficient for cutting both slabs and blocks of granite or marble. This versatile sawing machine is uniquely suited for small jobs as well as handling the most demanding production output. All operations can be executed manually or automatically. It is capable of executing “stop-cuts†to produce “blind†slots of any predetermined length as well as semi-circle and angle profiles that are selected from the keyboard. The Axia features GMM's signature accuracy: .004 of an inch over a 12-foot cut.
Technical Specifications
• Blade cutting stroke: 3,800 mm
• Blade vertical travel: 550 mm
• Maximum bridge movement: 3,500 mm
• Blade diameter (maximum): 1,050 mm
• Maximum cutting depth (largest blade): 3,400 mm
• Blade arbor hole diameter: 60 mm
• Table dimension (eight side shelves): 1,720 x 3,500 mm
• Blade motor power: 40/30 hp/kW
• Variable spindle speed: 570÷1,900 rpm
• Adjustable speed of blade carriage: 0÷18 m/min.
• Machine weight: 5,500 kg
• Overall dimension: 7.42 x 5.90 x 3.24 m
Circle No. 259
The Eura - a basic bridge sawing machine equally compatible with small workshops as well as large plants - is also available from Salem Stone/ GMM. It is easy to use, compact and efficient, according to the manufacturer. This versatile sawing machine is uniquely suited for small jobs as well as handling the most demanding production output. All operations can be executed manually or automatically by the easy-to-use multi-cut program, which is capable of processing parallel cuts with fixed dimensions repeatable up to 99 times. The Eura features GMM's signature accuracy: .004 of an inch over a 12-foot cut.
Technical Specifications
• Blade cutting stroke: 3,500 mm
• Blade vertical travel: 320 mm
• Maximum bridge movement: 3,500 mm
• Blade diameter (maximum): 625 mm
• Maximum cutting depth (largest blade): 205 mm
• Blade arbor hole diameter: 50 mm
• Table dimension (eight side shelves): 1,500 x 3,000 mm
• Blade motor power: 20/15 hp/kW
• Spindle speed (50/60 Hz): 1,450/1,725 rpm
• Adjustable speed of blade carriage: 0÷18 m/min.
• Machine weight: 3,400 kg
• Overall dimension: 6.36 x 5.75 x 2.60 m
Circle No. 258
Sawing Systems' Thunderhead diamond gantry bridge saw is one of two new saws from the company to be introduced this year. This particular saw traces its heritage back to the Tysaman 144, initially introduced in the late 40s. Though cosmetically a little different from the saw it replaces, the 541-C, the Thunderhead offers standard 144-inch blade travel, more power, a variety of control levels, digital readout of gantry movement and an Architectural Stone Package enabling the user to cut all stone types with one saw.
This truly is a multi-purpose saw, considering granite countertop fab-ricators as well as those cutting architectural limestone for exteriors, for example, will use the same basic saw, according to Sawing Systems. The extensive options list will provide the user with the ability to customize their machine. Some of the more common options are: laser light, water solenoid, choice of turntables, wireless pendant control, 144-inch cut capacity on both X and Y movements, 0 to 2,300 rpm variable speed hydraulic 90-degree tilting head, PLC (computer) with touch-screen controller for programming sequential cuts and customized paint colors.
Technical Specifications
• Horsepower: 15 or 20
• Level of automation: basic pushbutton operation to a fully programmable profiler
•Working dimensions: 144-inch bridge travel x 120-inch gantry travel (standard)
• Control description: integrated touch screen and/or pushbutton with a wireless pendant control optional
• Turntable description: standard 6- x 10-foot turntable with 360-degree rotation with positive stops or powered tilt (via 5-hp, hydraulic motor)
• Degree of head tilt: 90 degrees (optional)
• Blade size: 18-inch or 24-inch guards
• Production rate: feed to have variable speed 1 foot to 20 feet per minute controlled by a potentiometer
• Specific benefits for fabricators: the ability to customize your saw, including horsepower, level of controls, turntable type, fixed or variable blade speed, etc.
Circle No. 257
Sierra Tools & Abrasive now offers the TeCo Macchine Model SF25 bridge saw. This latest addition to its stable of precision machines was designed specifically for the American market. Like all TeCo saws, the SF25 bridge saw features a dual beam, oil bath and V-groove-slide design. This proven design provides precise cutting with no adjustments or wear parts for operator concern or adjustment.
The cutting motor is a 220 volt, 3-phase, heavy-duty, 20-hp motor with the optimal 1,450 rpm. The maximum blade capacity is 20 inches, and the machine has a 12-inch rise and fall (z axis). All movements on the X, Y, and Z axis are motorized and variable. The manual head tilt provides a full 90-degree travel to enable miter cuts, slotting and profiling. The cut length is 10 feet, 5 inches. The gantry travel front to rear is 12 feet.
The heavy-duty turntable has positive mechanical locks at 45 and 90 degrees, and a brake to lock the table at any degree required. The SF25 is equipped with an automatic water valve, remote cable control and cut marking laser. Pendant control arm, tilt hydraulic table and steel leg supports are optional.
Circle No. 256
The new bridge saw Thibaut TC 04 Numeric, available from EuroStone Machine is part of the new generation of “intelligent†machines. Simple to use and “comfortable,†the TC 04 Numeric is a step towards greater autonomy and creativity, according to the manufacturer. Sawing is considered a critical and complex phase requiring excessive time (precision, multiple handling operations, waiting time between cuts). The TC 04 Numeric makes processing easy, with menu-driven programming and logical icon selection. Rectilinear, orthogonal or curved cuts are made automatically.
A 360-degree rotating head replaces the rotating turntable and permits automatic (or manual) sawing in all directions. This means not only quicker cut-to-cut sawing, but also a smaller and more compact footprint. The operator may also program internal cuts (cook-top cut-outs and similar) at varying degrees of depth. The head tilts from 0 to 50 degrees, remaining balanced and sturdy.
The TC 04 Numeric is of mono-block construction, requiring no foundation, and is available with optional material handling alternatives, to move slabs and workpieces with ease.
Circle No. 255
The Denver Spectar from VIC International Corp. is a top-of-the line gantry saw for dimensioning stone slabs up to 11 feet, 5 inches long by 11 feet, 5 inches wide, according to the company. It has a high-quality, 15-hp motor with a 24-inch blade capacity. The Spectar has a programmable PA control mounted on an equalized boom with up to 99 lines of program instruction for automatic cutting of all three powered axis movements and has automatic flyback. There is also a hand-held pendant control for ease of blade alignment to the part, and the laser is included.
The tilting table is extremely sturdy and 10 feet x 5 feet in size. The table rotates 345 degrees with pneumatic locking system and fixed stops at every 45 degrees. Hydraulic tilt is controlled from the operator's panel.
The saw is constructed of a heavy steel beam, and the unit comes with steel piers so no block walls are needed. The saw feed is powered by an inverter with variable speed. The saddle travels on two replaceable linear guides with re-circulating bearing blocks. Lubrication is from a central manual pump. A rack and pinion system ensures accurate gantry rail movement. The saw head will tilt 0 to 45 degrees. Water is automatically turned on and off with the blade. Installation and training are included.
Circle No. 254
The Z. Bavelloni Sharp/500 has a strong cast-iron structure that is ruggedly constructed, yet easy to use. The machine, fit for cutting stone slabs, uses a rotating support table and is equipped with a cutting saw inclination enabling several working combinations. The bridge moves along two guides, which are fixed on retaining walls in reinforced concrete. A durable shaft, with up to a 90-degree incline, enables a slant cut and supports the 20-hp cutting spindle head. The spindle motor has a power of 15.1/13.5 kW, allowing for the user to select two rotation speeds. The worktable is capable of rotating 360 degrees with a hydraulic tilt to simplify loading. With one pass, a 130-mm-thick slab can be cut. For additional convenience, the numerical control can simply and easily store scores of cut programs.
Technical Specifications
• Maximum cutting depth: 130 mm
• Spindle power: 15.1/13.5 kW
• Spindle rpm: 1435/945
• Adjustment of working table inclination: hydraulic
• Working table dimensions: 3,200 x 1,900 mm
• Height of tilting working table: 615 mm
• Axis C rotation: from 0 to 360 degrees
Circle No. 253
